The CAN BUS FIREWALL is probably the first retrofittable immobiliser that communicates bi-directionally over up to two CAN bus and one LIN bus data system. This digital immobiliser helps protects your car from theft, Key cloning, Keyless range extension, learning vehicle keys, hacking the key code from the vehicle key, and even stealing the owners key. Only towing the car is still possible because a car thief will never be able to drive away with your car. The all new WFS400-PRO is the third generation of the CAN BUS FIREWALL protection, and is a vastly improved version on its predecessor in many ways, and in its functionality.
The WFS400-PRO no longer requires additional remote controls, transponders or driver cards. No flashing LED or keypads can lead to where about’s the installation of the device is located in your vehicle. In addition, the electronics are extremely compact, so the installation can be covertly hidden within the vehicles wiring harness. The system is armed automatically when the ignition is switched off.
To disarm the system, you have use existing buttons within your vehicle. You can designate your code using buttons on the steering wheel, the navigation or in the dash (the available buttons are vehicle specific, these are listed in the compatibility list. You must enter this code before each trip. The combination you choose is like entering the PIN of your credit/debit card.
In addition the WFS400-PRO uses RF technology. You can deactivate this immobiliser either by buttons in your car or wirelessly via RF. You can either use the optional transponder WFST400 or any compatible Apple iOS / Android smartphone. Of course, all our immobilisers have been tested for electromagnetic compatibility, have CE and E type approval and are registered with the WEEE.
We have aroused your interest in the WFS400-PRO, then contact us and get the benefits. In the compatibility list, you can check whether we have already developed suitable software for your vehicle.
FEATURES
- No cables in the vehicle are interrupted during installation
- Immobilisation by CAN data communication with the control button of the car
- 1 to 15-digit PIN code via CAN and LIN Bus supported buttons in the steering wheel or dashboard
- The WFS400-PRO electronics can not be tracked in the vehicle
- The immobiliser can not be bypassed electronically
- No radio signals are sent or received
- No additional remote controls or transponders are needed
- Uses the vehicle's own CAN and LIN data bus
- Silent operation without relay click noise
- PIN code can be changed at any time
- Service mode for garages or valet parking
- "Blocking" input for external control via optional GSM module
TECHNICAL SPECIFICATIONS
- Operating voltage 9-15 VDC
- Sleep current <8mA
- Working current <36.5mA
- Dimensions 25x20x7mm
- Weight 21g (module with wiring loom)
- Low Energy RF